MI-LIGHT MiBoxer Controller 5-in-1 RGB/CCT 12-36VDC 20A IP67

Operating voltage: 12–24
V DC Output current: 6 A per channel
Total output current: 20
A Range: 30 m – ∞
Operating temperature: -10–40 °C
Communication: 2.4 GHz
Warranty: 2 years
The LS2-WP universal LED controller is designed to control RGB+CCT, RGBW, RGB and CCT light sources, and MONO light sources. It is fitted with an indicator LED that facilitates parameter assignment and configuration. The controller allows for adjustment of the PWM frequency modulation. The built-in repeater function allows for an unlimited range; simply maintain a distance of 30 metres between consecutive MIBOXER devices. The product is waterproof.
How do you connect it?
You can use up to 4 control devices to manage a single product. The controller’s functions depend on what you’re using it to control. Familiarise yourself with the available control options: traditional, voice or via an app.
Please note that the control unit is not included in the set.
Note: The LS2-WP controller is designed specifically for use with RGB+CCT, RGBW, RGB, CCT and MONO light sources. Using this controller with other types of products may result in malfunction. Select an LED controller according to the type of LED light source.
It saves brightness, colour and temperature
settings. In the event of a power cut, thanks to the built-in memory, the brightness, colour and saturation settings will remain unchanged. There is no need to reset everything from scratch.
White, coloured, dimmable or non-dimmable – connect whatever you like
. This versatile controller allows you to choose which type of LED light source to use. Choose one type from 5 options: CCT/MONO/RGB/RGBW/RGB + CCT, and you’re all set!
With the Wi-Fi bridge, control your lighting from anywhere
Whether you’re in the garden or on holiday, with the Wi-Fi bridge you can remotely manage the lighting in your home. All you need is an app with internet access. You can easily simulate your presence or switch off the lights if you forgot to do so when leaving for work.
Assign and remove devices in seconds
. Simple steps carried out in the correct order allow you to quickly and efficiently assign or remove a specific light source from the control device.
Create several zones
By assigning devices to zones, you create a sort of group of light sources whose settings you wish to adjust at any given time. How do you choose products for your zones? It’s best to observe the patterns – one part of the room’s lighting is likely used during the day, whilst a different combination is used in the evening.
Safe and reliable
: In the event of a short circuit or power surge, the controller will cut off the power supply, preventing damage to the device.